DIN-rail Stand-Alone Qbus Dali Group Dimmer for 4 groups with built-in power supply, up to 64 DALI(2) drivers.

With this Qbus DALI Group Controller, you can easily control up to 4 lighting groups on the same DALI bus. The module can operate both Stand-Alone and with a Qbus controller.

The module has four push buttons on the front for group operation and configuration in Stand-Alone mode. The module is also equipped with an ECO relay to enable interruption of the voltage in systems with this feature.

DIN rail Module to connect the Qbus system to a DALI (2)-system (max. 64 addresses). Supports RGB(W) en WWCW on DALI (DT8). Allows easy control and visualisation via the familiar Qbus control panels (switches, detectors, Cloud, EQOmmand...) a DALI system.

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 5 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 3 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via standard pushbuttons, including one All Off button and Panic button. Qbus Stand-Alone module usable with or without controller

High-frequency dimmer for LED strips from 12 - 48V. With 4 outputs for dimming monochrome / WarmWhite-CoolWhite / RGB / RGBW LED strips. Combines dimmer and driver functionality. Qbus Stand-Alone DIN rail module usable with and without a controller

DIN rail module. Has 4 outputs that can be used as
analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used Stand-Alone (without
Controller) as there are 5 direct inputs on board for the connection of standard push buttons (including
an All Off & Panic button).