**Available from 25/03/2024**

The smart motion and light sensor (SENMoLi) is a bus-controlled and powered sensor. With its variants for both recessed and surface-mounted installations, it is highly suitable for ceiling mounting in residential projects such as toilets or living spaces. The SENMoLi is available in black or white versions.

**Available from 25/03/2024**

The SENMax is a bus-controlled and powered all-in-one sensor with motion, light, CO2, humidity, and temperature measurement capabilities. This makes this sensor highly versatile. Think of large commercial and residential projects such as medical practices or schools where CO2 measurements are required. This sensor is available in both recessed and surface-mounted variants.

In the SENPACK LEVEL the INA02 input module is combined with the Qbus 4-20mA liquid level meter to detect water or fuel levels between 5cm and 300cm. The measured values can be translated to a 0-100% value, thermostat mode, or when other fine data is required, universal mode can also be applied.

The SENPACK LEVEL is available in two versions, the SENPACK/1LEVEL; one INA02 with one liquid level gauge and the SENPACK/2LEVEL; one INA02 with two liquid level gauges.

The stylish detector SEN01M is a small motion detector that can be integrated in skirting boards, cabinets, walls, etc. or integrated in a metal frame. available in white (SEN01MW/RMW) and black (SEN01MW/RMB) The SEN01M has an integrated light sensor.

Multifunctional detector for wall or ceiling mounting, for indoor or outdoor use (IP55), which can detect temperature, light level and movement and can control 4 outputs based on one or a combination of these measured values. Available in white (SEN04MLT/OUTW) and black (SEN04MLT/OUTB)

The stylish detector SEN01M is a small motion detector that can be integrated in skirting boards, cabinets, walls, etc. The SEN01M has an integrated light sensor. available in white (SEN01MW) and black (SEN01MB)

The Qbus Dali Sensor is a combined passive infrared (PIR) motion sensor and photocell, and is to be connected directly on a DALI network. The DALI sensor (QDSEN) suitable for installation at 2.5m height with a detection range of 7m diameter

The Qbus Dali Sensor "high bay" is a combined passive infrared (PIR) motion sensor and photocell, 

suitable for installation at a maximum height of 15 meters with a detection range of 40 meters in diameter

The air quality sensors can contain a CO2 sensor, humidity sensor and a temperature sensor. Based on the values measured by these sensors the ventilation system can be controlled and the optimal air quality can be obtained without unnecessary energy loss.