DIN-rail Stand-Alone Qbus Dali Group Dimmer for 4 groups with built-in power supply, up to 64 DALI(2) drivers.

With this Qbus DALI Group Controller, you can easily control up to 4 lighting groups on the same DALI bus. The module can operate both Stand-Alone and with a Qbus controller.

The module has four push buttons on the front for group operation and configuration in Stand-Alone mode. The module is also equipped with an ECO relay to enable interruption of the voltage in systems with this feature.

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 3 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 5 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via standard pushbuttons, including one All Off button and Panic button. Qbus Stand-Alone module usable with or without controller

High frequency dimmer for LED strips from 12 - 48V. With 4 outputs for dimming monochrome / WarmWhite-CoolWhite / RGB / RGBW LED strips. Combines dimmer and driver functionality. Qbus Stand-Alone DIN rail module usable with and without a controller